External wall transparent waterproof adhesive

This product takes pure acrylic emulsion as the main raw material, adds a variety of functional additives, and through scientific advanced r & D technology refined from the polymer elastic wall transparent waterproof products. The product is easy to use and can be directly coated without removing the original finishes. It is suitable for waterproof repair of seepage of exterior wall of various buildings. It is a transparent waterproof product of exterior wall with excellent waterproof effect.

Product features:

1. Excellent waterproof effect, high bonding strength, not easy to fall off;

2. Transparent and waterproof, does not affect the original wall decoration effect, not easy to stick back after dry solid, not easy to turn yellow, good durability;

3. Wide range of adaptation to the environment, heat resistance, uv resistance, aging resistance;

4. The coating film has excellent elasticity and good adhesion, which can effectively resist the stress generated by tiny cracks in the base;

5. No need to remove the original finish, open the bucket, easy construction, brush coating, roller coating, spraying can be;

6. Water environmental protection, with water as the dispersion medium, no solvent pollution.

Product specification: 5kg/ barrel, 18kg/ barrel (white liquid, transparent after drying)

Scope of application:

1. Suitable for all kinds of building wall leakage waterproof repair;

2. Suitable for waterproof and moisture-proof surface of interior and exterior decoration materials;

3. Suitable for waterproof and moisture-proof treatment at the interface of various decorative materials.

Construction method:

1. The base surface to be constructed will be cleaned with water, detergent, cloth, etc.;

2. Small pores, trachoma and cracks on the base surface need to be repaired and smoothed with cement mortar;

3. Use the brush to brush the transparent waterproof adhesive on the wall, the joint of the decorative brick, shall not leak the brush;

4 general brushing 2-3 times, pay attention to the previous coating dry solid to non-stick hand before brushing next time, and brushing direction should be horizontal and horizontal intersection.

Reference dosage:

0.3-0.5kg /㎡ (the actual amount depends on the actual situation of the base surface and the thickness of the waterproof layer required).

Matters needing attention:

1. The construction environment temperature should be 5℃-35℃;

2. Before construction, the base must be dry and without water;

3. In case of rain during construction, please stop construction and protect the area under construction;

4. In the construction process, such as the viscosity of the glue is too large, can be diluted with a small amount of water;

5. The film shall be completely dried for about 24 hours, and shall not meet water before the film is dry. Water can be tested only after a tight and transparent waterproof protective film is formed.

Transportation and storage:

1. This product is non-flammable and explosive, non-dangerous goods, can be transported as general goods, should avoid extrusion during transportation, keep the package intact, and prevent exposure and freezing;

2. The product is stored in a cool, ventilated, dry place, storage temperature 5℃-35℃ is appropriate.

Safety Guidelines:

When using this product, please wear gloves and other protective measures. If it sticks to hands or clothes, please wash it with water immediately.